三上悠亚av影院在线看,女教师办公室被强在线播放,好男人在线资源免费观看视频,国产毛1卡2卡3卡4卡免费观看

Hopper Dryer Series

Hopper Dryer

Product Info

Hopper dryer Introduction:

    Hopper dryers can also be called ordinary dryers, which are the most economical dryers for dry plastic raw materials. This hopper dryers can be used together with the injection molding machine, simple and efficient! Hopper dryer is standard hot air dryer replacement products, based on the original features fully take into account environmental factors, to be improved. It can dry raw materials that are damp due to packaging, shipping or recycling.

干燥機20150417_副本.jpg


Hopper dryer works:

    In the raw material processing, the hopper dryer blows the constant high temperature wind into the drying barrel through the drying fan, and after the raw materials are baked, the original moisture in the raw material in the barrel is taken away to achieve the purpose of removing the moisture contained in the raw materials. The air blown by the fan turns into a high-temperature dry hot air after electric heating, and the hot air can be uniformly dispersed in the dry air drier by the screen protector and the hole screen. Optional hot air recovery device, the wind blowing through the return air filter into the dry fan to form a closed loop, saving electricity.


Hopper dryer application area:


    Hopper dryer is the most effective and economical model for drying plastic materials, which can dry the raw materials that are damp, packed, transported or recycled. The straight-through design is particularly suitable for direct mounting on plastic molding machines for drying, both fast and space-saving. This type of blowing hot air dryer can provide a charge of 12 to 1,000 kg, is divided into thirteen models.


Hopper dryer features:


1, the use of uniform distribution of hot air of high-performance hot air diffusion devices, plastic drying temperature to maintain uniform, increase drying efficiency.

2, unique hot air pipe design, can avoid the accumulation of dust at the bottom of the electric heater, causing the combustion.

3, barrel and internal parts are made of stainless steel.

4, barrel separation from the bottom, clean the material convenient, fast material change.

5, the use of proportional deviation temperature controller can accurately control the temperature.

6, a double overheat protection device, can reduce the human or mechanical failure caused by accidents.

7, a variety of models are available preheating timing device, microcomputer control, and double insulation barrel selection.

8, all digital P.I.D control LED status display.

9,0-99 hours timer automatically boot.

10, to provide intermittent drying methods, in order to achieve the purpose of saving electricity. (8-10 SHD-DT series only)

11, transparent window type magnet base.


Hopper dryer working schematic:


圖片1.jpg

Hopper dryer maintenance and care:


1, the filter clean up. Air inlet filter should be regularly checked, cleaned regularly, when the filter is blocked, the amount of air intake decreases, affecting the drying effect.

2, splitter cleaning: replacement of raw materials, the separator to wipe clean

3, the clean-up of the dust chamber: In the drying process, the powder material fall into the dust collection room for a long time accumulated, so need to regularly remove the drying chamber can be opened and start the fan, the use of wind blowing the powder.

4, the screen raw material caking cleanup: If the temperature is too high due to some reason, the raw materials caked in the screen when the material can not fall, this time prohibited the use of hard objects such as iron stick scraping to protect the screen separator by Loss, remove the barrel decomposition.

5, Shutdown: very hot after switching on and off, and then close the fan to ensure that the heating tube is fully cooled to extend its life.


Dry hopper installation and use:

The company is located in:

1, Installation: After drilling the base of the dryer, stand upright on the inlet of the injection molding machine and fasten it with fastening screws.

2, Connect the power: Open the power distribution box, connect the power supply with reference to the wiring diagram, should pay attention to whether the power supply voltage is consistent with the local, the power switch specifications and load protection rated is appropriate, and start the fan to see if the direction of rotation with the fan superscript Direction, the electrical box on the back of the box with "┷" grounding mark on the bolt connected to the wire and properly grounded.

3, temperature regulation: reference to the drying temperature of plastic raw materials reference table, set the thermostat temperature based on practical experience.

4, the air volume regulation: generally all open, in case of material storage bucket when the material is not long, or when the need for higher temperature, the discretion of small air volume, or can not achieve the desired drying effect.

5, raw material filler: filler to ensure that the material content of not less than 70%, but not too full, so as not to pressure the lid, affecting the drying effect.

6, the transparent drying of raw materials: the drying of transparent raw materials must be installed in the air inlet filter (the original sponge, etc.) to prevent dust in the air to enter.

7, Preheat the bucket: Before the input of raw materials, the bucket is heated first, so that the internal moisture drying, preheating time 10-20 minutes.


service
Phone
0512-57731860

Mr Chen 15995626538


Wap
久久成人国产精品| 日韩人妻无码精品无码中文字幕| 国产在线视频一区二区三区| 人人爽人人爽人人片av| 综合久久给合久久狠狠狠97色 | av潮喷大喷水系列无码| 亚洲中文字幕久久精品无码喷水 | 女人高潮被爽到呻吟在线观看 | 国产免费人成视频在线观看| 日韩精品亚洲aⅴ在线影院| 一女被多男玩喷潮视频| 欧美乱妇高清无乱码| 精品国产乱码久久久久久郑州公司| 三级特黄60分钟在线观看| 脱岳裙子从后面挺进去视频| 女人夜夜春高潮爽a∨片| 看国产一毛片在线看手机看| 亚洲av成人无码网站| 色窝窝免费播放视频在线| 免费看av在线网站网址| 午夜福利av无码一区二区| 少妇被又大又粗又爽毛片| 成人欧美一区二区三区黑人免费 | 国产精品a免费一区久久电影| 日本aⅴ大伊香蕉精品视频| 欧美巨大黑人极品精男| 人妻夜夜添夜夜无码av| 亚洲av人人澡人人爽人人夜夜| 在线天堂中文在线资源网| 永久在线观看免费视频| 天天躁夜夜躁狠狠是什么心态| 久久精品第九区免费观看| 国产一区二区三区日韩精品| 亚洲av无码一区二区三区人妖| 亚洲狠狠婷婷综合久久 | 日韩精品久久无码中文字幕| 丰满熟女人妻中文字幕免费| 欧美日韩亚洲国内综合网| 欲求不満の人妻松下纱荣子| 国产欧美日韩精品a在线观看| 欧美老熟妇乱子伦视频|